Construction of boron | Catalyst Co.,Ltd

Nature Communications volume 13, Article number: 2624 (2022) Cite this article

6051 Accesses

9 Citations

2 Altmetric

Metrics details

Compared with the well-developed carbon-stereogenic chemistry, the construction of boron-stereogenic compounds remains undeveloped and challenging. Herein, the previously elusive catalytic enantioselective construction of boron-stereogenic compounds has been achieved through enantioselective desymmetric B–H bond insertion reaction. The B–H bond insertion reaction of 2-arylpyridine-boranes with versatile diazo compounds under chiral copper catalyst can afford boron-stereogenic compounds with good to excellent enantioselectivity. Moreover, the synthetic utility of this reaction is demonstrated by the scalability and downstream transformations. DFT calculations provide insights into the reaction mechanism and the origin of stereoselectivity.

Boron is an important metalloid element in organic chemistry. Boron typically forms tricoordinate chiral organoboron compounds with carbon-stereogenic centers, which serve as important synthetic reagents to access optically active molecules1,2,3,4,5. In addition, tricoordinate organoboron compounds can also be designed as axial chiral frameworks, efforts to asymmetric catalytic preparation of chiral organoboron compounds bearing C-B bond axis have been achieved by our group6 and Tan & Zhang’s group7, respectively (Fig. 1A). Tricoordinate organoboron compounds have an empty p-orbital that can accept electrons from Lewis bases or nucleophiles to form tetracoordinate organoboron compounds with a tetrahedral geometry8,9,10,11,12,13,14,15. If the four substituents of the tetracoordinate organoboron compounds are all different, the boron atom is also a stereogenic center which is similar to the carbon, phosphine16,17,18,19, sulfur20,21,22 or silicon23,24 center. In fact, boron-stereogenic compounds can be found in natural products25 and materials26,27 as well (Fig. 1B). Despite the significance of boron-stereogenic compounds, enantioselective catalytic methods for the construction of such chiral compounds are elusive, so far there is only one enantioenriched protocol reported by He et al. to procure such boron-stereogenic compounds, which was achieved by desymmetrization of diacetylative tetracoordinate boron species via a CuAAC click chemistry (Fig. 1C)28, the other known approaches to them are restricted to the chiral resolution or chiral substrate-induced processes29,30,31,32,33,34,35,36,37,38. Of note, due to the small size of the boron atom (compared to very known atoms which could reveal stereogenic centers, such as carbon, nitrogen, sulfur, phosphorus etc.), it will be a challenge if the enantioselective reaction site was direct on boron itself. Thus, it leaves great space and makes the development of catalytic enantioselective synthesis of boron-stereogenic compounds with diverse structures become extremely appealing yet challenging as well.

A Current status of chiral organoboron chemistry. B Boron-stereogenic compounds in nature product and material. C Asymmetric CuAAC for the synthesis of boron-stereogenic compounds (He et al.). D Catalytic desymmetric B-H insertion toward boron-stereogenic compounds (this work).

Enantioselective desymmetrization has emerged as one of the most frequently investigated strategy to access chiral molecules39,40,41,42,43,44. In order to construct the boron-stereogenic center directly on the boron atom, which was distinct from the known strategy, a suitable and stable tetracoordinate organoboron substrate with two identical reaction sites is the key to the success of this goal. On the other hand, the carbene-directed B–H bond insertion reaction represents an efficient approach for the construction of new C-B bonds45,46,47,48,49,50,51,52,53,54,55,56,57. The catalytic process was pioneered by Curran48 and Zhou & Zhu49, and the latter two achieved the first asymmetric carbene insertion into the B − H bonds of phosphine−borane adducts (M2HP•BH3). Most remarkably, the targeted products are stable tetracoordinate organoboranes bearing two same B-H bonds, which perfectly meet our requirement and could serve as an ideal starting material for our purpose. Grounded on the knowledge, we envision that a metal-catalyzed enantioselective desymmetric B-H bonds insertion of such tetracoordinate boranes (L•BH2R) with diazo compounds could render the desired enantioenriched boron-stereogenic compounds (L•B*HRR’) directly on boron atom. However, this chemistry would encounter some major challenges: (1) The current B-H bond insertion reaction mainly occurs in the first B-H bond of tetracoordinate borane (L•BH3), and the second B-H bond of tetracoordinate borane (L•BH2R) is relatively inert and rarely investigated48. (2) The known tetracoordinate organobranes (L•BH2R) are linear, which has labile nature, the choice of a suitable skeleton for tetracoordinate borane substrates would be essential for the success of the hypothesis. (3) To the best of our knowledge, there are no precedent reports that the B-X (X = C, H, O, N, P) bond is directly involved in the construction of boron-stereogenic compounds. Inspired by our previous report, cyclic tetracoordinate borons with an N-containing ligand would provide rigid scaffold, which will enhance the feasibility for the construction of enantioenriched boron stereogenic compounds58.

Here, we show a copper-catalyzed enantioselective construction of boron-stereogenic center direct on boron atom via desymmetric B–H bond insertion using 2-arylpyridine-borane (L•BH2R) as substrate with carbenes, providing a straightforward and efficient route toward boron-stereogenic compounds (Fig. 1D). DFT calculations elucidate the origin of excellent enantioselectivity and diastereoselectivity.

To explore the proposed enantioselective desymmetric B–H bond insertion reaction, initial substrate assessing was performed with substituted 2-arylpyridine-boranes (1) and diazo compounds (2) (Fig. 2). After carefully examining various reaction parameters (entries 1-10, Fig. 2), we found that the corresponding desired boron-stereogenic product 3 was smoothly obtained using Cu(MeCN)4PF6 (5 mol%) as catalyst, diethyl substituted chiral bisoxazoline L as ligand, DCM as solvent at 0 °C under argon. Among the examined tetracoordinate boron substrates which bear substitutions on the different positions of benzene and pyridine rings (1a-1h), 7-chloro-substituted 2-phenylpyridine-borane (1a) demonstrated the best enantioselectivity with excellent yield (entry 1, Fig. 2) with (diazomethylene)dibenzene (2a), which suggested that the introduction of a substituent at C7-position of 2-arylpyridine-boranes (1) was conducive to the stereocontrol of this transformation.

Conditions: a 2-arylpyridine-borane (1) (0.1 mmol, 1.0 equiv), diazo compound (2) (0.1 mmol, 1.0 equiv), Cu(MeCN)4PF6 (5 mol%), ligand L (6 mol%), solvent (1 mL) at 0 °C for 9 h. b Isolated yield. c Determined by chiral HPLC. d Diazo compound 2aa instead of 2a. e Diazo compound 2ab instead of 2a.

In order to understand whether the benifits comes from the steric or electronic effect of the substituents on C7-position, DFT calculations were performed on this optimal result (see Supplementary Information (SI) for more details about computational methods, and Supplementary Data 1 for XYZ coordinates). Interestingly, we found that after transferring hydride to carbene center, the borane substrate was transformed to a boron cation which further underwent a barrierless SE2 process delivering the final product (see Supplementary Fig. 1 in SI). The difference in barrier (ΔΔG‡) with 1a as substrate was calculated to be 1.9 kcal/mol, while ΔΔG‡ with 1b (no substituents on C7-position) was calculated to be only 0.5 kcal/mol (Fig. 3). These computational results successfully reproduced that the introduction of substituent on C7-position enhances enantioselectivity. In addition, we carried out distortion-interaction analysis59 (see Supplementary Table 3 in SI) and found that the relative interaction energies (ΔΔEint) match well with ΔΔG‡, hinting the origin of stereoselectivity and addressing the significant role of substituent on C7-position. By carefully comparing the geometries of key transition states, we found that Cl atom, which carries high electron density, points to the more congested space in TSR-3a-L6 when borane substrate approaches catalyst, which renders longer C–H bond length with less interaction between hydride and copper-carbene (see Supplementary Fig. 2 in SI for more details). When 1b was used as substrate, there is no essential difference in electron density between pyridine and unsubstituented phenyl ring, leading to minor difference in barrier and poor stereoselectivity. Of note, when diazo compounds expanded to diethyl 2-diazomalonate (2aa) and ethyl 2-diazoacetate (2ab), trace or moderate amount of desired products were obtained with poor enantioselectivities (entries 9-10, Fig. 2).

All computational results are performed at the M06/SMD/def2TZVP//B3LYP/SMD/def2SVP level of theory.

With the preliminary substrate-assessment results in hand, we decided to choose 7-chloro-substituted 2-phenylpyridine-borane (1a) and (diazomethylene)dibenzene (2a) as model substrates to perform further and prudent condition evaluations. More chiral oxazolines (L1-L6) were tested and it turned out that ligand L1 demonstrated the best reactivity and stereoselectivity (entries 1-6, Fig. 4) (see Supplementary Tables 1 and 2 in SI for more ligands). Subsequent solvent and temperature examinations indicated that DCM and -35 °C could render an optimal result with the generation of the desired product 3a in 95% yield with 91% ee (entries 7-10, Fig. 4).

Conditions: a 7-Cl 2-phenylpyridine-borane (1a) (0.1 mmol, 1.0 equiv), (diazomethylene)dibenzene (2a) (0.12 mmol, 1.2 equiv), Cu(MeCN)4PF6 (5 mol%), ligand (6 mol%), solvent (1 mL) at 0 °C for 20 h. b Isolated yield. c Determined by chiral HPLC. d DCE instead of DCM. e THF instead of DCM. f -20 °C instead of 0 °C. g -35 °C instead of 0 °C.

Having optimized the model desymmetric B–H bond insertion reaction with symmetric diazo compounds (Figs. 2 and 4), we first examined the substrate generality of these conditions with respect to different symmetric diazo compounds (Fig. 5). In general, a series of substituted diaryl diazomethanes 2a-2k reacted smoothly with 7-Cl-2-phenylpyridine-boranes (1a), producing the corresponding enantioenriched boron-stereogenic compounds 3a-3k in moderate to excellent yields and good to excellent enantioselectivities. The halogens (3b-3d, 3 h), methoxy group (3e-3f), methyl group (3 g) as well as symmetric polyphenyl cyclic rings (3h-3k) all participated efficiently in this process, yielding the target boron-stereogenic molecules in good to excellent enantioselectivities (83-98% ee). Next, a series of 2-arylpyridine-borane derivatives (3l-3s) were tested to investigate the substrate scope of this enantioselective B–H bond insertion reaction with (diazomethylene)dibenzene (2a). It is of note that 2-arylpyridine-boranes bearing various halogens all proceeded smoothly under the standard conditions with good to excellent enantioselectivities (3l-3r, 88-92% ee). Disubstituted 2-arylpyridine-boranes could furnish enantioenriched boron-stereo-genic compounds (3n-3r) with high yields (79-95%) and enantioselectivities (88-91% ee). 2-Naphthylpyridine-borane (1s) also provided the corresponding product 3s in 90% yield with 93% ee. The structure and absolute configuration of compound 3n was determined by X-ray crystallographic analysis (CCDC 2125214).

Conditions: a 2-arylpyridine-borane 1 (0.1 mmol, 1.0 equiv), symmetric diaryl diazomethane 2 (0.12 mmol, 1.2 equiv), Cu(MeCN)4PF6 (5 mol%), L1 (6 mol%), DCM (1 mL) at -35 °C for 9 h. b Isolated yield.

Encouraged by the outcomes of this enantioselective desymmetric B-H bond insertion reaction with symmetric diaryl diazomethanes (Fig. 5), which only generated one B-stereogenic center in the final products, we prompted to explore the feasibility of 7-chloro-substituted 2-phenylpyridine-borane (1a) with unsymmetric diazo compound, specifically, ethyl α-diazoarylacetates 4a, since two consecutive stereogenic centers would be resulted and in asymmetric synthesis, such protocols are always a big challenge with both high enantioselectivity and diastereoselectivity. To our delight, with the rapid evaluation of chiral bisoxazolines, ligand L2 demonstrated the best enantioselectivity (98% ee) and diastereoselectivity (dr > 20:1) (entries 1-6, Fig. 6). Further solvent screening indicated that the best reaction efficiency was endowed by DCE (entries 6-8, Fig. 6). It should be noted that this reaction was diastereoselective even in the absence of chiral ligand (entry 9, Fig. 6), however, the ratio of the two diastereomers are only 2:1, with the help of chiral ligand, both enantioselectivity and diastereoselectivity are dramatically improved (entry 2, Fig. 6). Interestingly, the diastereomers of this reaction were isolable. And the absolute configuration of 5a was unambiguously assigned by X-ray crystallographic analysis (CCDC 2104867).

Conditions: a 2-arylpyridine-borane (1a) (0.12 mmol, 1.2 equiv), ethyl α-diazophenylacetate (4a) (0.1 mmol, 1 equiv), Cu(MeCN)4PF6 (5 mol%), ligand (6 mol%), solvent (1 mL) at 0 °C for 20 h. b Isolated yield. c Determined by 1H NMR. d Determined by chiral HPLC.

Having arrived at the optimal conditions with unsymmetric ethyl α-diazoarylacetate 4a (entry 7, Fig. 6), we first examined the substrate generality of these conditions with respect to different 2-arylpyridine-boranes 1 with ethyl α-diazoarylacetate (4a) (Fig. 7). DFT calculations suggested that substituents on C7 position of 2-arylpyridine-boranes are very important in order to construct enantioenriched tetracoordinate boron species. Like the aforementioned symmetric carbene insertion, the origin of the chirality of B-stereogenic center is resulted from the interaction between chiral environment of copper-carbene and the asymmetric steric structure of borane, which is not sorely induced by the construction of C-stereogenic center. Gratifyingly, our experimental outcomes perfectly validated the DFT calculations. For instance, compared to the chiral product 5b which was generated with 7-fluoro-2-phenylpyridine-borane, 8-fluoro-2-phenylpyridine-borane delivered the corresponding product 5c with good enantioselectivity (90% ee) while much lower dr value (>20:1 vs 3.3:1). In general, a series of 7-substituted 2-phenylpyridine-boranes 1 reacted smoothly with ethyl α-diazophenylacetate (4a), the corresponding enantioenriched boron-stereogenic compounds 5b, 5d-5l were procured in good to excellent yields and enantioselectivities as well as excellent diastereoselectivities (dr > 20:1). For example, a variety of halogen substituents were tolerated well, all yielding the target boron-stereogenic molecules 5b, 5d-5k in both excellent enantioselectivities (93-99% ee) and diastereoselectivities (>20:1 dr), no matter they were mono- or disubstituted ones. The methyl (5 g, 5k and 5 m) and trifluoromethoxy (5 l) groups substituted 2-phenylpyridine-boranes all participated efficiently in this process, only compound 5 m rendered with a relative poor dr value (6.5:1). To our delight, 2-heteroarylpyridine-boranes were also good substrates for this enantioselective desymmetric B–H bond insertion reaction, boron-stereogenic products 5n and 5o were obtained in good yields with good diastereoselectivities and excellent enantioselectivities. The introduction of substituent at the 1 position of pyridine ring had minimal influence on the reactivity and enantioselectivity of this transformation, however, it lowered the diastereoselectivity (5p, 91% ee vs 3:1 dr). Next, the scope of α-diazoarylacetates 4 was investigated. Changing the ester moiety of α-diazoarylacetates to methyl, benzyl, tert-butyl and phenyl did not change the excellent outcomes, they were all good candidates to deliver the corresponding product 5q-5t in excellent enantioselectivities and diastereoselectivities. Both electron-rich (5u-5y) and electron-poor (5z, 5aa) groups, as well as halogens (5ab-5ad) on the benzene ring of α-diazoarylacetates underwent this enantioselective desymmetric B–H bond insertion reaction with moderate to excellent enantioselectivities and excellent diastereoselectivites. Moreover, α-diazo 2-naphthylacetates (5ae) was also compatible to this reaction.

Conditions: a 2-arylpyridine-borane (1) (0.12 mmol, 1.2 equiv), α-diazoarylacetate 4 (0.1 mmol, 1 equiv), Cu(MeCN)4BF4 (5 mol%), L2 (6 mol%), DCE (1 mL) at 0 °C. b Isolated yield.

To demonstrate the synthetic utility of this enantioselective desymmetric B–H bond insertion reaction (Fig. 8), we first performed a gram-scale reaction. To our delight, this reaction shows similar efficiency and enantioselectivity under the condition of halving the catalyst (Fig. 8A), which indicates that the large-scale chemical production of the boron-stereogenic compound could be achieved. In addition, the derivatizations of boron-stereogenic compound 5a were also conducted to further showcase the synthetic utility. Gratifyingly, the boron-stereogenic compound 5a could further undergo B-H bond insertion reaction, affording 3-carbon substituted boron-stereogenic compound 6 with the retention of chirality (98% ee). Moreover, the ester moiety of 5a could also be reduced to the alcohol 7 in the presence of DIBAl-H. It should be noted that the bromide 5d could be easily converted to complex 8 by palladium-catalyzed cross-coupling (Fig. 8B). Remarkably, we could combine the double B-H bond insertion reactions with a two-step in one-pot protocol (Fig. 8C). Without further purification after the enantioselective desymmetric B-H bond insertion between 1a and 4a, the second diazo compound 9 was directly added to the reaction mixture in the absence of new catalyst and new ligand, the desired product 6 was obtained in 76% isolated yield with 97% ee.

A Gram-scale reaction. B Transformations. C One-pot reaction to access 3-carbon substituted boron-stereogenic compound 6.

To explore the reaction mechanism, some isotope experiments were carried out (Fig. 9). When deuterated 2-phenylpyridine-borane 9-d2 was used as the substrate, the deuterium atom was transferred to the α-carbon of the boron-stereogenic product 9-d2 (Fig. 9A). Moreover, the kinetic isotope effect (KIE) experiment (kH/kD = 1.5) indicated that B-H bond insertion process (including B−H bond cleavage and C−H bond formation) might not be involved in a rate-determining step (Fig. 9B), and this result was consistent with previous report52.

A Deuterium labeling experiment. B KIE experiment.

DFT calculations (Fig. 10) show that when dichloro-substituented substrate 1n was used, TSSR-5h-L3, the transition state ultimately leading to the experimentally observed product 5 h, is the most favorable one among four different configurations. Distortion-interaction analysis59 (see Supplementary Table 4) reveals that the relative distortion energies of the copper-carbene (ΔΔEdist(carbene)) are the dominant contributor to the difference in relative barriers of reaction (ΔΔG‡). The orientation of the ester group in TSSR-5h-L3 is preserved compared to the optimized structure of copper carbene. In contrast, the ester group in TSSS-5h-L3 rotates away from ideal geometry by around 10˚ to avoid strong repulsion of Cl atom, causing an elevation of Gibbs energy (see Supplementary Fig. 3). Similarly, copper-carbene fragment in TSRS-5h-L3 contains more congested space, rendering itself more sensitive to the entrance of borane substrate (see Supplementary Fig. 4). A larger distortion of ligand in TSRS-5h-L3 could explain the larger distortion energy of the copper-carbene fragment and the corresponding difference in the barrier of reaction. When 1b was used as substrate, although enantioselectivity is still high due to the similar reason for 1n (Supplementary Fig. 5), the diastereomeric ratio drops from more than 20:1 to 3.3:1. This interesting result is consistent with the decrease in the calculated ΔΔG‡ and the relative distortion energies of the copper-carbene (ΔΔEdist(carbene)). The orientation of the ester group are similar for TSSR-11-L3 and TSSS-11-L3, since it is hard for copper carbene to differentiate unsubstituented phenyl ring and pyridine in the absence of Cl atom on C7-position (Supplementary Fig. 6). Both experimental and computational results articulates the vital role of C7-substitution for improving diastereoselectivity.

All computational results are performed at the M06/SMD/def2TZVP//B3LYP/SMD/def2SVP level of theory.

In conclusion, we have achieved a catalytic protocol for the construction of boron-stereogenic compounds, via enantioselective copper-catalyzed desymmetric B–H bond insertion reaction of 2-arylpyridine-boranes with diazo compounds, and a series of enantioriched boron-stereogenic compounds were efficiently synthesized with high enantioselectivity and diastereoselectivity. Both experiments and DFT calculations suggested that the introduction of a substituent at C7-position of 2-arylpyridine-boranes was conducive to the stereocontrol of this transformation. Moreover, 2-arylpyridine-borane could also undergo twice B-H bond insertion reactions to obtain 3-carbon substituted boron-stereogenic compound. Further investigations to the utility of these boron-stereogenic molecules are currently underway in our laboratory.

In air, a 10 mL schlenk tube was charged with 1 (0.10 mmol, 1.0 equiv), 2 (0.12 mmol, 1.2 equiv), Cu(MeCN)4PF6 (5 mol%), L1 (6 mol%). The tube was evacuated and filled with argon for three cycles. Then, 1 mL of DCM was added under argon. The reaction was allowed to stir at -35 °C for 9 hours. Upon completion, proper amount of silica gel was added to the reaction mixture. After removal of the solvent, the crude reaction mixture was purified on silica gel (petroleum ether and ethyl acetate) to afford the desired products.

In air, a 10 mL schlenk tube was charged with 1 (0.12 mmol, 1.2 equiv), 4 (0.1 mmol, 1 equiv), Cu(MeCN)4PF6 (5 mol%), L2 (6 mol%). The tube was evacuated and filled with argon for three cycles. Then, 1 mL of DCE was added under argon. The reaction was allowed to stir at 0 °C for 20 hours. Upon completion, the proper amount of silica gel was added to the reaction mixture. After removal of the solvent, the crude reaction mixture was purified on silica gel (petroleum ether and ethyl acetate) to afford the desired products.

The X-ray crystallographic coordinates for structures of 3n and 5a reported in this Article have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition numbers CCDC 2125214 (3n) and 2104867 (5a). These data can be obtained free of charge from http://www.ccdc.cam.ac.uk/data_request/cif (The Cambridge Crystallographic Data Centre). Experimental procedures, characterization of new compounds, and DFT calculations (see Supplementary Data 1 for XYZ coordiantes) are available in the Supplementary information.

Leonori, D. & Aggarwal, V. K. Stereospecific Couplings of Secondary and Tertiary Boronic Esters. Angew. Chem. Int. Ed. 54, 1082–1096 (2015).

Article CAS Google Scholar

Wang, H., Jing, C., Noble, A. & Aggarwal, V. K. Stereospecific 1,2-Migrations of Boronate Complexes Induced by Electrophiles. Angew. Chem. Int. Ed. 59, 16859–16872 (2020).

Article CAS Google Scholar

Wang, C.-Y., Derosa, J. & Biscoe, M. R. Configurationally stable, enantioenriched organometallic nucleophiles in stereospecific Pd-catalyzed cross-coupling reactions: an alternative approach to asymmetric synthesis. Chem. Sci. 6, 5105–5113 (2015).

Article CAS PubMed PubMed Central Google Scholar

Sandford, C. & Aggarwal, V. K. Stereospecific functionalizations and transformations of secondary and tertiary boronic esters. Chem. Commun. 53, 5481–5494 (2017).

Article CAS Google Scholar

Fyfe, J. W. B. & Watson, A. J. B. Recent Developments in Organoboron Chemistry: Old Dogs, New Tricks. Chem 3, 31–55 (2017).

Article CAS Google Scholar

Yang, K. et al. Construction of Axially Chiral Arylborons via Atroposelective Miyaura Borylation. J. Am. Chem. Soc. 143, 10048–10053 (2021).

Article CAS PubMed Google Scholar

Yang, J. et al. Chiral Phosphoric Acid-Catalyzed Remote Control of Axial Chirality at Boron–Carbon Bond. J. Am. Chem. Soc. 143, 12924–12929 (2021).

Article CAS PubMed Google Scholar

Yang, K. & Song, Q. Tetracoordinate Boron Intermediates Enable Unconventional Transformations. Acc. Chem. Res. 54, 2298–2312 (2021).

Article CAS PubMed Google Scholar

Wang, M. & Shi, Z. Methodologies and Strategies for Selective Borylation of C–Het and C–C Bonds. Chem. Rev. 120, 7348–7398 (2020).

Article CAS PubMed Google Scholar

Staubitz, A., Robertson, A. P. M., Sloan, M. E. & Manners, I. Amine− and Phosphine−Borane Adducts: New Interest in Old Molecules. Chem. Rev. 110, 4023–4078 (2010).

Article CAS PubMed Google Scholar

Staubitz, A., Robertson, A. P. M. & Manners, I. Ammonia-Borane and Related Compounds as Dihydrogen Sources. Chem. Rev. 110, 4079–4124 (2010).

Article CAS PubMed Google Scholar

Neeve, E. C., Geier, S. J., Mkhalid, I. A. I., Westcott, S. A. & Marder, T. B. Diboron(4) Compounds: From Structural Curiosity to Synthetic Workhorse. Chem. Rev. 116, 9091–9161 (2016).

Article CAS PubMed Google Scholar

Légaré, M.-A., Pranckevicius, C. & Braunschweig, H. Metallomimetic Chemistry of Boron. Chem. Rev. 119, 8231–8261 (2019).

Article PubMed CAS Google Scholar

Curran, D. P. et al. Synthesis and Reactions of N-Heterocyclic Carbene Boranes. Angew. Chem. Int. Ed. 50, 10294–10317 (2011).

Article MathSciNet CAS Google Scholar

Cuenca, A. B., Shishido, R., Ito, H. & Fernández, E. Transition-metal-free B–B and B–interelement reactions with organic molecules. Chem. Soc. Rev. 46, 415–430 (2017).

Article CAS PubMed Google Scholar

Liu, S., Li, Y., Wang, D., Wei, R. & Miao, Z. Research Progress of Asymmetric Synthesis of Optically Active P-Stereogenic Organophosphoryl Compounds by Chiral Induction. Chin. J. Org. Chem. 38, 341–349 (2018).

Article CAS Google Scholar

Harvey, J. S. & Gouverneur, V. Catalytic enantioselective synthesis of P-stereogenic compounds. Chem. Commun. 46, 7477–7485 (2010).

Article CAS Google Scholar

Grabulosa, A., Granell, J. & Muller, G. Preparation of optically pure P-stereogenic trivalent phosphorus compounds. Coord. Chem. Rev. 251, 25–90 (2007).

Article CAS Google Scholar

Engel, R. & Rizzo, J. I. Stereogenic Phosphorus. Curr. Org. Chem. 10, 2393–2405 (2006).

Article CAS Google Scholar

Otocka, S., Kwiatkowska, M., Madalińska, L. & Kiełbasiński, P. Chiral Organosulfur Ligands/Catalysts with a Stereogenic Sulfur Atom: Applications in Asymmetric Synthesis. Chem. Rev. 117, 4147–4181 (2017).

Article CAS PubMed Google Scholar

Liu, W., Ke, J. & He, C. Sulfur stereogenic centers in transition-metal-catalyzed asymmetric C–H functionalization: generation and utilization. Chem. Sci. 12, 10972–10984 (2021).

Article CAS PubMed PubMed Central Google Scholar

Cui, Y.-M., Lin, Y. & Xu, L.-W. Catalytic synthesis of chiral organoheteroatom compounds of silicon, phosphorus, and sulfur via asymmetric transition metal-catalyzed C–H functionalization. Coord. Chem. Rev. 330, 37–52 (2017).

Article CAS Google Scholar

Xu, L.-W., Li, L., Lai, G.-Q. & Jiang, J.-X. The recent synthesis and application of silicon-stereogenic silanes: A renewed and significant challenge in asymmetric synthesis. Chem. Soc. Rev. 40, 1777–1790 (2011).

Article CAS PubMed Google Scholar

Shintani, R. Recent Advances in the Transition-Metal-Catalyzed Enantioselective Synthesis of Silicon-Stereogenic Organosilanes. Asian. J. Org. Chem. 4, 510–514 (2015).

CAS Google Scholar

Hütter, R. et al. Stoffwechselprodukte von Mikroorganismen. 57. Mitteilung. Boromycin. Helv. Chim. Acta 50, 1533–1539 (1967).

Article PubMed Google Scholar

Pop, F., Zigon, N. & Avarvari, N. Main-Group-Based Electro- and Photoactive Chiral Materials. Chem. Rev. 119, 8435–8478 (2019).

Article CAS PubMed Google Scholar

Haefele, A., Zedde, C., Retailleau, P., Ulrich, G. & Ziessel, R. Boron Asymmetry in a BODIPY Derivative. Org. Lett. 12, 1672–1675 (2010).

Article CAS PubMed Google Scholar

Zu, B., Guo, Y. & He, C. Catalytic Enantioselective Construction of Chiroptical BoronStereogenic Compounds. J. Am. Chem. Soc. 143, 16302–16310 (2021).

Article CAS PubMed Google Scholar

Shinji, T., Fumiko, I., Naoya, N. & Tomohiro, H. Substituent Effects on Configurational Stabilities at Tetrahedral Boron Atoms in Intramolecular Borane–Amine Complexes: Structures, Enantiomeric Resolution, and Rates of Enantiomerization of [2-(Dimethylaminomethyl)phenyl]phenylboranes.Bull. Chem. Soc. Jpn. 77, 2081–2088 (2004).

Article CAS Google Scholar

Charoy, L., et al. Synthesis of benzylcyanoborane adducts of amines and separation of their enantiomers; S2 substitution at boron atom. Chem. Commun. 2275–2276 (2000).

Beltrán, H. I., Zamudio-Rivera, L. S., Mancilla, T., Santillan, R. & Farfán, N. X-ray analysis and structural characterization of 2-phenyl-6-aza-1,3-dioxa-2-borabenzocyclononenones. J. Organometal. Chem. 657, 194–204 (2002).

Article Google Scholar

Shiner, C. S., Garner, C. M. & Haltiwanger, R. C. Synthesis and crystal structure of an optically active, internally coordinated alkylchloroborane. The boron-centered anomeric effect. J. Am. Chem. Soc. 107, 7167–7172 (1985).

Article CAS Google Scholar

Vedejs, E., Chapman, R. W., Lin, S., Müller, M. & Powell, D. R. Crystallization-Induced Asymmetric Transformation vs Quasi-Racemate Formation in Tetravalent Boron Complexes. J. Am. Chem. Soc. 122, 3047–3052 (2000).

Article CAS Google Scholar

Braun, M., Schlecht, S., Engelmann, M., Frank, W. & Grimme, S. Boron-Based Diastereomerism and Enantiomerism in Imine Complexes – Determination of the Absolute Configuration at Boron by CD Spectroscopy. Eur. J. Org. Chem. 2008, 5221–5225 (2008).

Article CAS Google Scholar

Kaiser, P. F., White, J. M. & Hutton, C. A. Enantioselective Preparation of a Stable Boronate Complex Stereogenic Only at Boron. J. Am. Chem. Soc. 130, 16450–16451 (2008).

Article CAS PubMed Google Scholar

Schlecht, S., Frank, W. & Braun, M. Chelated Boronate–Imine and Boronate–Amine Complexes as Chiral Dopants for Nematic Liquid Crystals. Eur. J. Org. Chem. 2010, 3721–3731 (2010).

Article CAS Google Scholar

Jiménez, V. G. et al. Circularly Polarized Luminescence of Boronic Acid-Derived Salicylidenehydrazone Complexes Containing Chiral Boron as Stereogenic Unit. J. Org. Chem. 83, 14057–14062 (2018). 2018.

Article PubMed CAS Google Scholar

Aupic, C. et al. Highly diastereoselective preparation of chiral NHC-boranes stereogenic at the boron atom. Chem. Sci. 10, 6524–6530 (2019). 2019.

Article CAS PubMed PubMed Central Google Scholar

Díaz de Villegas, M. D., Gálvez, J. A., Etayo, P., Badorrey, R. & López-Ram-de-Víu, P. Recent advances in enantioselective organocatalyzed anhydride desymmetrization and its application to the synthesis of valuable enantiopure compounds. Chem. Soc. Rev. 40, 5564–5587 (2011).

Article CAS Google Scholar

Manna, M. S. & Mukherjee, S. Catalytic asymmetric desymmetrization approaches to enantioenriched cyclopentanes. Org. Biomol. Chem. 13, 18–24 (2015).

Article CAS PubMed Google Scholar

Zeng, X.-P., Cao, Z.-Y., Wang, Y.-H., Zhou, F. & Zhou, J. Catalytic Enantioselective Desymmetrization Reactions to All-Carbon Quaternary Stereocenters. Chem. Rev. 116, 7330–7396 (2016).

Article CAS PubMed Google Scholar

Ding, Y.-X., Zhu, Z.-H., Yu, C.-B. & Zhou, Y.-G. Recent Advances in Reductive Desymmetrization of Diketones. Asian J. Org. Chem. 9, 1942–1952 (2020).

Article CAS Google Scholar

Sietmann, J. & Wiest, J. M. Enantioselective Desymmetrization of Cyclobutanones: A Speedway to Molecular Complexity. Angew. Chem. Int. Ed. 59, 6964–6974 (2020).

Article CAS Google Scholar

Carmona, J. A., Rodríguez-Franco, C., Fernández, R., Hornillos, V. & Lassaletta, J. M. Atroposelective transformation of axially chiral (hetero)biaryls. From desymmetrization to modern resolution strategies. Chem. Soc. Rev. 50, 2968–2983 (2021).

Article CAS PubMed Google Scholar

Zheng, G. & Jones, M. Reaction of (ethoxycarbonyl)carbene with o-carborane. J. Am. Chem. Soc. 105, 6487–6488 (1983).

Article CAS Google Scholar

Bedel, C. & Foucaud, A. Reaction of dichlorocarbene with 1,2-dihydro 1,2 λ3-azaphosphinine-boranes: Dichlorocyclopropanation and insertion into boron-hydrogen bond. Tetrahedron Lett. 34, 311–314 (1993).

Article CAS Google Scholar

Ramírez-López, P., Sierra, M. A., Gómez-Gallego, M., Mancheño, M. J. & Gornitzka, H. New Reactivity Modes of Chromium(0) Fischer Carbene Complexes: Unprecedented Insertion of a Carbene Ligand into an Active B−H Bond. Organometallics 22, 5092–5099 (2003).

Article CAS Google Scholar

Li, X. & Curran, D. P. Insertion of Reactive Rhodium Carbenes into Boron–Hydrogen Bonds of Stable N-Heterocyclic Carbene Boranes. J. Am. Chem. Soc. 135, 12076–12081 (2013). 2013.

Article CAS PubMed Google Scholar

Cheng, Q.-Q., Zhu, S.-F., Zhang, Y.-Z., Xie, X.-L. & Zhou, Q.-L. Copper-Catalyzed B–H Bond Insertion Reaction: A Highly Efficient and Enantioselective C–B Bond-Forming Reaction with Amine–Borane and Phosphine–Borane Adducts. J. Am. Chem. Soc. 135, 14094–14097 (2013). 2013.

Article CAS PubMed Google Scholar

Cheng, Q., Xu, H., Zhu, S.-F. & Zhou, Q.-L. Enantioselective Copper-Catalyzed B—H Bond Insertion Reaction of α-Diazoketones. Acta Chim. Sin. 73, 326–329 (2015).

Article ADS CAS Google Scholar

Yang, J.-M. et al. Catalytic B–H Bond Insertion Reactions Using Alkynes as Carbene Precursors. J. Am. Chem. Soc. 139, 3784–3789 (2017).

Article CAS PubMed Google Scholar

Pang, Y. et al. Rhodium-Catalyzed B–H Bond Insertion Reactions of Unstabilized Diazo Compounds Generated in Situ from Tosylhydrazones. J. Am. Chem. Soc. 140, 10663–10668 (2018).

Article CAS PubMed Google Scholar

Ye, J.-H., Quach, L., Paulisch, T. & Glorius, F. Visible-Light-Induced, Metal-Free Carbene Insertion into B–H Bonds between Acylsilanes and Pinacolborane. J. Am. Chem. Soc. 141, 16227–16231 (2019).

Article CAS PubMed Google Scholar

Yang, J.-M. et al. Insertion of Alkylidene Carbenes into B–H Bonds. J. Am. Chem. Soc. 142, 20924–20929 (2020).

Article CAS PubMed Google Scholar

Otog, N., Chanthamath, S., Fujisawa, I. & Iwasa, S. Catalytic Asymmetric Carbene Insertion Reactions into B−H Bonds Using a Ru(II)-Pheox Complex. Eur. J. Org. Chem. 2021, 1564–1567 (2021).

Article CAS Google Scholar

Hyde, S. et al. Copper-Catalyzed Insertion into Heteroatom–Hydrogen Bonds with Trifluorodiazoalkanes. Angew. Chem. Int. Ed. 55, 3785–3789 (2016). 2016.

Article CAS Google Scholar

Chen, D., Zhang, X., Qi, W.-Y., Xu, B. & Xu, M.-H. Rhodium(I)-Catalyzed Asymmetric Carbene Insertion into B–H Bonds: Highly Enantioselective Access to Functionalized Organoboranes. J. Am. Chem. Soc. 137, 5268–5271 (2015).

Article CAS PubMed Google Scholar

Yang, K., Zhang, G. & Song, Q. Four-coordinate triarylborane synthesis via cascade B–Cl/C–B cross-metathesis and C–H bond borylation. Chem. Sci. 9, 7666–7672 (2018).

Article CAS PubMed PubMed Central Google Scholar

Bickelhaupt, M. & Houk, K. N. Analyzing Reaction Rates with the Distortion/Interaction-Activation Strain Model. Angew. Chem. Int. Ed. 56, 10070–10086 (2017).

Article CAS Google Scholar

Download references

Financial support from National Natural Science Foundation of China (21931013) (to Q.S.), Guangdong Provincial Key Laboratory of Catalysis (No. 2020B121201002) (to Q.S. and P.Y.) and Open Research Fund of School of Chemistry and Chemical Engineering, Henan Normal University (to Q.S.) is gratefully acknowledged. Computational work was supported by Center for Computational Science and Engineering at Southern University of Science and Technology, and the CHEM high-performance supercomputer cluster (CHEM-HPC) located at the Department of Chemistry, Southern University of Science and Technology.

These authors contributed equally: Guan Zhang, Zhihan Zhang.

Key Laboratory of Molecule Synthesis and Function Discovery, Fujian Province University, College of Chemistry at Fuzhou University, Fuzhou, Fujian, 350108, China

Guan Zhang, Mengyuan Hou, Xinping Cai, Kai Yang & Qiuling Song

Department of Chemistry and Shenzhen Grubbs Institute, Guangdong Provincial Key Laboratory of Catalysis, Southern University of Science and Technology, Shenzhen, Guangdong, 518055, China

Zhihan Zhang, Peiyuan Yu & Qiuling Song

Institute of Next Generation Matter Transformation, College of Materials Science Engineering at Huaqiao University 668 Jimei Boulevard, Xiamen, Fujian, 361021, China

Qiuling Song

School of Chemistry and Chemical Engineering, Henan Normal University, Xinxiang, Henan, 453007, China

Qiuling Song

You can also search for this author in PubMed Google Scholar

Q.S. conceived and directed the project. G.Z. & M.H. performed experiments and prepared the supplementary information. X.C. & K.Y. helped collecting some new compounds analyzing the data. P.Y. and Z.Z. performed the DFT calculations and drafted the DFT parts. Q.S., P.Y., G.Z. & Z.Z. wrote the paper. All authors discussed the results and commented on the manuscript.

Correspondence to Peiyuan Yu or Qiuling Song.

The authors declare no competing interests.

Nature Communications thanks Longwu Ye, and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Zhang, G., Zhang, Z., Hou, M. et al. Construction of boron-stereogenic compounds via enantioselective Cu-catalyzed desymmetric B–H bond insertion reaction. Nat Commun 13, 2624 (2022). https://doi.org/10.1038/s41467-022-30287-7

Download citation

Received: 14 January 2022

Accepted: 21 April 2022

Published: 12 May 2022

DOI: https://doi.org/10.1038/s41467-022-30287-7

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.